Certified Product: HP BladeSystem c7000 and c3000 Enclosure with OA v4.40, VC v4.41, and iLO 4 v2.11

Hewlett Packard Enterprise Development LP
Sy.No.192, Whitefield Road
Mahadevapura Post
Bangalore 560048
India

HP BladeSystem c7000 and c3000 Enclosure with OA v4.40, VC v4.40, and iLO 4 v2.11 (hereafter referred to as HP BladeSystem c7000 and c3000), from Hewlett Packard Enterprise Development LP, was the subject of a Common Criteria evaluation performed by the Common Criteria Evaluation Facility at CGI IT Security Evaluation & Test Facility The evaluation was completed in December 2015.

The evaluation of HP BladeSystem c7000 and c3000 determined that this Information Technology (IT) product can be trusted, to EAL 2+ (ALC_FLR.2), to conform to the requirements of the associated security target.

HP BladeSystem c7000 and c3000 is a hardware-software TOE running in two allowable modes of operation. Virtual Connect (VC) Mode comprises a BladeSystem c7000 or c3000 rack-mountable enclosure, one or more Onboard Administrator (OA) modules, one or more VC modules, one or more server blades that include Integrated Lights Out (iLO) functionality, and one or more power supplies. Non-VC Mode includes all of the configuration parameters of VC Mode except there are no VC modules installed in the appliance. The VC modules are replaced with any of the compatible HP pass-through interconnect module options.

The scope of this evaluation is defined by the security target, which identifies assumptions made during the evaluation, the intended environment for the HP BladeSystem c7000 and c3000, the IT security requirements to be met, and the level of confidence (evaluation assurance level) to which it is asserted that the HP BladeSystem c7000 and c3000 satisfies its IT security requirements.

Consumers are advised to carefully review the certification report to gain an understanding of the security functionality, the evaluated configuration, and the intended operating environment for HP BladeSystem c7000 and c3000.

Documents